miniature aluminum electrolytic capacitors n specifications n size list n dimensions ugx/uax series reduced high frequency impedance to 60% and increased maximum permissible ripple current as compared with ug series (same size series). ugx/uax series has same characteristics as ug series even if 1 size smaller, so contributes toward miniaturization of any products. it is suitable for dc/dc converter , inverter for lcd backlight and noise limiter etc. solvent proof (within 2 minutes). 5mm in length, low impedance (solvent proof) ugx / uax series items 6.3 0.24 3 5 10 0.20 2 4 25 0.14 2 3 35 (120hz) 0.12 2 3 4.7 10 15 22 27 33 47 56 68 100 120 130 150 220 m f v 6.3 4 5 5 5 5 5 6.3 5 6.3 5 6.3 5 2.20 0.76 0.76 0.44 0.44 0.44 80 150 150 230 230 230 10 4 5 5 5 6.3 5 6.3 5 2.20 0.76 0.44 0.44 80 150 230 230 16 4 5 5 5 6.3 5 6.3 5 6.3 5 6.3 5 2.20 0.76 0.44 0.44 0.44 0.44 80 150 230 230 230 230 25 4 5 5 5 5 5 6.3 5 6.3 5 6.3 5 2.20 0.76 0.76 0.44 0.44 0.44 80 150 150 230 230 230 35 4 5 5 5 5 5 5 5 6.3 5 6.3 5 2.20 0.76 0.76 0.76 0.44 0.44 80 150 150 150 230 230 16 0.16 2 4 4 1.5 0.45 5 2.0 0.45 6.3 2.5 0.45 100 10 1 0.1 100 1k 10k 100k 1m impedance ( w ) (at - 10 c) a b c a : uw series b : ug series c : ugx/uax series 10v - 33 m f ( f 5 5) frequency (hz) n frequency vs. impedance ugx uax low impedance ug ?34 z - 40 c /z 20 c z - 55 c /z 20 c d c/c tan d l.c. rated voltage operating temperature range capacitance tolerance tangent of loss angle(tan d )(max.)(120hz) leakage current (l.c.)( m a/after 2min.)(max.) impedance (120hz) ratio at low temperature (max.) high-temperature load 105 c 1000hrs. rated voltage applied other characteristics (v) ( c) (%) specifications - 55 to + 105 20 the greater value of either 0.01cv or 3 f d + 0.5max. sleeve l + 1max. 15min. f d 0.05 20min. 5min. f 0.5 (unit : mm) f d f f d case size ; f d l (mm) impedance ; ( w ) max. at 100khz, 20 c maximum permissible ripple current ; (ma r.m.s.) at 100khz, 105 c model no. 35mv10ugx 35v, rated voltage 10 m f, nominal capacitance 35mv10uax 35v, rated voltage 10 m f, nominal capacitance ripple current case size impedance within 25% of the initial value twice the initial standard the initial standard conform to iec 384-4 sanyo electronic components co.,ltd.
|
